Fuseholders
[Main] [Bike Specific] [Fuseboxes] [Elec. Products] [Connectors] [Wiring Kits] [Fasteners] [Tools] [Company] [Clearance] [New Stuff] [Shipping]

 This Page

 

MINIMUM ORDER IS $10 (not including shipping). I’m sorry but I will refund all orders less than $10.
If you are in a hurry please make sure you get fast EMS shipping, see our Shipping Page for details.

FUSEHOLDERS

We’ve got many choices for both small blade ATM type fuses, and full size blade ATF/ATO types. Fuses are at the bottom of the page.

Metri-Pack Connectors are here.

Extra Info and Photos are here.

Metri-Pack 280

30A Single Fuseholder for ATM Type Mini Blade Fuses
metripack_parts
This fuseholder comes with all the parts above to integrate it into your wiring.

Click below to order:

MP280 Fuseholder (14-12 AWG)  $3.99

Quantity:

MP280 Fuseholder (18-16 AWG)  $3.92

Quantity:

MP280 Fuseholder (22-20 AWG)  $3.92

Quantity:

weatherpack
See below for fuses.


Metri-Pack 280 Terminals and Seals

Female terminal for wire sizes 18-16AWG  $0.22

Quantity:

280_female_18_16

Female terminal for wire sizes 14-12AWG  $0.24

Quantity:

280_female_14_12

Red Seal for wire sizes 22 -20 AWG   $0.16

Quantity:

mp280-redseal

Green Seal for wire sizes 18-16 AWG   $0.18

Quantity:

mp280-greenseal

Grey Seal for wire sizes 16 -12 AWG   $0.16

Quantity:

mp280-greyseal


Metri-Pack 280 3 Fuse Fuseholder for ATM Type Mini Blade Fuses

6 Pole HD Waterproof Connector and Cap.

May be used with 3 ATM fuses.

Go here for this unit in a complete 3 fuse kit.

Tough plastic housing with inner seal, plus seals for each wire.

NOTE: Other sizes of seals for smaller wires are available above.

Click below to buy:

3 Fuse Holder (18-16 AWG) $6.95 ea

Quantity:

3 Fuse Holder (14-12 AWG) $7.49 ea

Quantity:

6pmetri280

Tree Clip for Above $1.49 ea

Slides onto the back of the 3 fuse unit and locks in place. Drill a hole and mount it by pushing into the hole.

3-circuit-mount
metripack280_clip
See below for fuses.


Metri-Pack 630

 30A Fuseholder for ATF/ATO Type Full Size Blade Fuses

Extra Info and Photos are here.

mp630b

NOTE: These terminals must come back into the housing AFTER crimping. Insert the wires through the seal and housing, crimp on the terminals and pull them back into the housing. Push the seal back into place.

Metripack 630 (14-12 AWG) Fuseholder  $4.39

Quantity:

See below for fuses.


Metri-Pack 630 Extra Terminals

Female Terminal for wire sizes 14-12   $0.43

Quantity:

630_female_14_12


Cooper-Bussman 30A Fuseholder for ATM Type Mini Blade Fuses
C-Bfuseholderlong_9089

This high quality fuseholder will work for any project where you need to add a fuse.

- 4” (10 cm) 12 AWG leads molded into fuseholder on each side

- good for a maximum of 30A

- small size fits easily anywhere on a bike

- replaceable weatherproof cap

- made in U.S.A.

30 Amp ATM Weatherproof Fuseholder -  $3.95

Quantity:

See below for fuses.


20A Single Fuseholder for ATM Type Mini Blade Fuses by Yazaki

single-fh-atm

This fuseholder comes with 6 inches of 14 AWG (2 sqmm) wire on each side.

Can be clipped together.

Single Yazaki ATM 20A Fuseholder -  $6.95

Quantity:


20A Single Sealed Fuseholder for ATM Type Mini Blade Fuses by Furukawa

furukawa fh1

Housing holds a spare fuse.

furukawa fh2

This fuseholder accepts wire from 16-12 AWG.

Housing holds spare fuse.

Can be clipped together.

Single Furukawa Sealed ATM 20A Fuseholder -  $6.95

Quantity:

Extra Terminals and Seals

Single Furukawa FH Extra Terminal -  $0.25

Quantity:

Single Furukawa FH Extra Seal -  $0.25

Quantity:


Modular 20A Single Fuseholder for ATF/ATO Type Full Size Blade Fuses

single-fh-ato

This fuseholder holds one full sized blade fuse and can take wires up to 14 AWG (2 sqmm). It has a 20A capacity.

This fuseholder comes with a plug in connector into which your crimped or soldered wires are inserted. It is not sealed but the housing and cap keeps out dirt and moisture pretty well, while allowing any heat to dissipate.

Single Modular ATO Fuseholder -  $6.95

Quantity:


Modular 2x(20A) Dual Fuseholder for ATF/ATO Type Full Size Blade Fuses

dual-fh-ato
This fuseholder holds two full sized blade fuses and can take wires up to 14 AWG (2 sqmm). It has a 2x20A capacity.

This fuseholder comes with a plug in connector into which your crimped or soldered wires are inserted. It is not sealed but the housing and cap keeps out dirt and moisture pretty well, while allowing any heat to dissipate.

Dual Modular ATO Fuseholder -  $9.95

Quantity:


Blade Fuses

2A ATM Blade Fuse $0.25

2a_atm_fuse

Quantity:
 

5A ATM Blade Fuse $0.25

5Aminifuse

Quantity:
 

7.5A ATM Blade Fuse $0.25

7-5Aminifuse

Quantity:
 


10A ATM Blade Fuse $0.25

10Aminifuse

Quantity:
 

15A ATM Blade Fuse $0.25

15Afuse_9088

Quantity:
 

20A ATM Blade Fuse $0.25

20Afuse_9088

Quantity:
 


30A ATM Blade Fuse $0.25

30Afuse_9088

Quantity:
 

15A ATF/ATO Blade Fuse $0.30

atf-15a_0014

Quantity:
 

30A ATF/ATO Blade Fuse $0.30

30A-fuse-atf1

Quantity:
 

NEW STUFF

Reusable Cable Ties

cable ties reuse

Wiring Loom Clamps

cable clamp 10mm