THIS PAGE - for DL1000s from 2014 on and DL650s from 2017 on

Everything on this page is specifically for these bikes, hereafter refered to as “New DLs”

ON THIS PAGE: PC-8 Kit - Brake/Tail Adapters - Accessory Power Adapter

PC-8 and 50A Relay Kit for New DLs

This Kit is for all DL1000s from 2014 on and DL650s from 2017 on - go here for older VStrom models. This special edition of the PC-8 Kit includes everything you will need to install the PC-8 and its wiring kit under the seat.

This superb fuse panel is full of all the features every rider has ever wanted and more! Easy to install, well protected, and with 8 mini fuses, one on each output circuit. Includes 8 output grounds too. Kit is made from highest quality high temp wire and sheathing. Just strip your circuit wires and insert into the PC-8 outputs and tighten the screws. Both power and ground terminal blocks are built in.

Read all about the PC-8 and it’s features here.

The Powerlink option allows quick disconnection of the PC-8 Kit for jump starting your bike or another bike from yours, or using a splitter you can hookup the PC-8 and another high current device like a high powered horn. Read all about the Powerlink System and it’s features here.

This Kit is now 50A capable using dual main fuseholders.

pc8-dl1000-bat
Similar to the ‘older’ VStrom Kit, but with different lengths to make this an easy and perfect install on your new DL1000 or DL650 from 2017.

PC-8 with Relay Kit for New DLs $112.95

Connection Option


PC-8/AP-2 Relay Kit Only for New DLs (No PC-8) $55.95

Connection Option


The PC-8 is also available separately on my PC-8 Page.

Powerlink Option puts a HD connector on the battery leads so you can jumpstart a bike or install a high output Horn Kit, and more.
pc8-18-pl2
Powerlink Battery Leads are extra, buy below.

Powerlink Battery Leads for VStrom

Battery lead lengths for VStrom are POS +6” for New DL Kit.

PL Battery Leads for New DLs  $16.95

Quantity:

plbl6-p6


DL1000s 2014 on - Rear Lighting Adapters (may fit DL650s from 2012-16)

These bikes have a pair of different connectors for rear lighting. One 3P sealed plugs directly into the tail light housing for the brake and tail lights. The other 4P connector is used for signals and licence plate light. If you have a DL650 from 2012-16 please check your connector before ordering one of these.

dl1000a-t-b

Version 1 - all wires are take-offs from stock wires. Red wire is brake, blue wire is tail, and black is ground.

New DLs Brake/Tail Adapter V1 $24.95

Quantity:

Version 2 - brakelight wire has input  (purple) and output (red) wires for BackOff type modulators. Tail light wire (blue) and ground (black) are take-offs from stock wires.

New DLs Brake/Tail Adapter V2 $28.95

Quantity:

dl1000a-s-l

Signal wires (2), licence light wire, and ground wire are take-offs from stock wires. Yellow and white wires are signals, purple wire is licence light, and black wire is ground.

New DLs Signal/Licence Adapter $16.95

Quantity:


DL650s 2017 on Brake/Tail Adapter

This new unit is currently only on these bikes. We make two versions, functioning the same as the  Brake/Tail Adapters above, but using different connectors to mate with the bike. These bike use the same signal/licence adapter above. I suggest you check your connector before ordering one of these.

new dl650-b-t

Version 1 - all wires are take-offs from stock wires. Red wire is brake, blue wire is tail, and black is ground.

New DL650 Brake/Tail Adapter V1 $24.95

Quantity:

Version 2 - brakelight wire has input  (purple) and output (red) wires for BackOff type modulators. Tail light wire (blue) and ground (black) are take-offs from stock wires.

New DL650 Brake/Tail Adapter V2 $28.95

Quantity:


NEW Accessory Power Adapter for DL650s 2017 on - We don’t know for sure if this fits the new DL1000s 2014 on or not, please let us know. I can’t say if it does. Please check your bike before ordering if it is a newer DL1000. We do not know if this adapter fits the DL1050, let us know if it does please.

Accessory power adapter plugs into the connector taped to the wiring harness on the left side. Note, the connector used is the same as the earlier one but the other gender, and wire polarity is reversed. The bike comes with a connector housing with plugs in it as a cap.

Specifications:

36” (91 cm) 16 AWG high temp wires in high temp sheathing.

newdl650-aa

New DLs Aux Power Adapter $12.95

Quantity:


New DLs and Older VStrom products - many older VStrom adapters still fit the new bikes. The heated grip adapter, the rear brakelight switch relay switching adapter, and all 3 Circuit Solutions for VStrom will fit. Everything else not mentioned on this list will not fit the New DLs.

Some older VStrom stuff will fit newer models, like bar wire extensions and H4 Relay Kits, see the Older VStrom section.