|
ON THIS PAGE - ATM mini blade fuseholders - ATO/ATF fullsize blade fuseholders - Fuses
ATM mini blade fuseholders - (black or white)
30A Single Sealed Fuseholder for ATM Type Mini Blade Fuses by Furukawa
|
Included in each unit
|
|
|
 |
|
|
|
Housing holds a spare fuse.
|
|
|
|
 |
|
|
easily clip together
|
|
|
|
|
|
 |
|
|
|
Two sizes of terminals and seals available to fit wires from 20-12 AWG. Housing holds spare fuse. Can be clipped together.
Now available with 12 inch leads (24” total) of 12 AWG wire, includes battery terminal and wire sheath, choose white or black.
|
|
|
WHITE Single Furukawa Sealed ATM 30A Fuseholder S(20-16 AWG)- $5.95
|
|
|
WHITE Single Furukawa Sealed ATM 30A Fuseholder L(16-12 AWG) - $5.95
|
|
|
|
WHITE Fuseholder with Leads (24”) - $12.95
|
|
|
|
BLACK Single Furukawa Sealed ATM 30A Fuseholder S(20-16 AWG)- $5.95
|
|
|
BLACK Single Furukawa Sealed ATM 30A Fuseholder L(16-12 AWG) - $5.95
|
|
|
BLACK Fuseholder with Leads (24”) - $12.95
|
|
|
EXTRA TERMINALS AND SEALS - two sizes of seals and terminals are available.
Female terminal fits wires 16-12 AWG (left)
|
FKW 110-Terminal-L $0.19 ea
|
|
Female terminal fits wires 20-16 AWG (right)
|
FKW 110-Terminal-S $0.17 ea
|
|
Small seal fits wires 18-14 AWG
|
FKW 110-Seal (green/grey) $0.15 ea
|
|
Large seal fits wires 14-12 AWG)
|
FKW 110-Seal (black) $0.15 ea
|
|
|
|
|
20A Single Unsealed Fuseholder for ATM Type Mini Blade Fuses by Sumitomo
 |
|
|
|
|
|
|
|
Sumitomo ATM 20A Fuseholder - $3.95
|
|
|
DIY Body and 2 Terminals
|
|
|
|
|
|
|
|
Sumitomo Extra Terminals - $0.35
|
|
|
Terminals Fit This Fuseholder Only
|
|
|
|
|
|
|
|
Sumitomo ATM 20A Fuseholder (with 8” wires) - $5.95
|
|
|
8 inches of high quality 2 sqmm wire (14 AWG) pre-crimped in place
|
|
|
|
|
These fuseholders can be clipped together. They are used on some Honda ATVs etc. Honda seems to think they are 30A capable but I recommend 20A max on these, it’s just a small nylon housing and obviously won’t take much heat to melt.
3 Fuseholder for ATM Type Mini Blade Fuses by Delphi (Metripack 280)
|
6P (3 fuse) HD Waterproof Connector and Cap.
May be used with 3 ATM fuses.
Go here for this unit in a complete 3 fuse kit.
Tough plastic housing with inner seal, plus seals for each wire.
NOTE: Other sizes of seals for smaller wires are available above.
|
|
|
|
3 Fuse Holder (18-16 AWG) $9.95 ea
|
|
|
|
3 Fuse Holder (14-12 AWG) $9.95 ea
|
|
|
|
|
|
Mounting Clip for Above 3 Fuseholder
|
|
|
|
|
Slides onto the back of the 3 fuse unit and locks in place. Drill a hole and mount it by pushing into the hole.
|
|
|
MP280-Tree Clip $0.95
|
|
|
|
|
|
|
|
See below for fuses.
30A Single Sealed Fuseholders for ATO/ATF or ATM Types by Cooper-Bussman
High quality molded unit, don’t be fooled by cheap Chinese knockoffs. This fuseholder has been reliable in many of my products over the years.
- 4” (10 cm) 12 AWG leads molded into fuseholder on each side
- weatherproof tethered cap
|
30 Amp ATM/ATF Weatherproof Fuseholder - $4.95
|
|
ATO/ATF fullsize blade fuseholders
30A Single Fuseholder for ATO Type Fullsize Blade Fuses by Delphi (Metripack 630)
Extra Info and Photos are here.
NOTE: These terminals must come back into the housing AFTER crimping. Insert the wires through the seal and housing, crimp on the terminals and pull them back into the housing. Push the seal back into place.
|
Metripack 630 (14-12 AWG) Fuseholder $6.95
|
|
Metri-Pack 630 Extra Terminals
|
Female Terminal for wire sizes 14-12 $0.43
|
|
|
|
Modular 20A Single Fuseholder for ATF/ATO Type Full Size Blade Fuses
This fuseholder holds one full sized blade fuse and can take wires up to 14 AWG (2 sqmm). It has a 20A capacity.
This fuseholder comes with a plug in connector into which your crimped or soldered wires are inserted. It is not sealed but the housing and cap keeps out dirt and moisture pretty well, while allowing any heat to dissipate. Made in Japan by Pacific Fuse.
|
Single Modular ATO Fuseholder - $4.95
|
|
Modular 2x(20A) Dual Fuseholder for ATF/ATO Type Full Size Blade Fuses
This fuseholder holds two full sized blade fuses and can take wires up to 14 AWG (2 sqmm). It has a 2x20A capacity.
This fuseholder comes with a plug in connector into which your crimped or soldered wires are inserted. It is not sealed but the housing and cap keeps out dirt and moisture pretty well, while allowing any heat to dissipate. Made in Japan by Pacific Fuse.
|
Dual Modular ATO Fuseholder - $9.95
|
|
Blade Fuses
|
2A ATM Blade Fuse $0.25
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
5A ATM Blade Fuse $0.25
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
7.5A ATM Blade Fuse $0.25
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
7.5A Low Profile ATM Fuse
|
|
|
|
 |
|
|
|
7.5A Low Profile ATM Fuse $0.95
|
|
|
|
10A ATM Blade Fuse $0.25
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
15A ATM Blade Fuse $0.25
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
20A ATM Blade Fuse $0.25
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
30A ATM Blade Fuse $0.25
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
15A ATF/ATO Blade Fuse $0.30
|
|
|
|
|
 |
|
|
|
|
|
|
|
30A ATF/ATO Blade Fuse $0.30
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
