|
All New Aux Wiring Solution Sealed Accessories and Components
We have reworked all the Aux Wiring Solution models with all new modular fuseholders that hold extra fuses, and a neater, more compact design. At the same time we’ve increased battery lead length to easier fit all bike models.
|
|
ON THIS PAGE:
Closeup Pics
3CS-S Extra Parts
3CS-S Leads
3CS-S Splitters
3CS-S Options
3CS-S Install Instructions
|
|
|
|
|
NEED IT FAST?
See my Shipping Page to make sure you get EMS fast international shipping.
|
|
|
Protective Diode Option: A protective diode can be ordered inline on the ignition switched lead, preventing reverse EMF flow back to the bike. This is highly recommended for CANBus bikes. Only for Kits with relays.
|
Protective Diode in Switching Wire Option $5.95
|
|
Closeup pics
|
each fuseholder can carry a spare fuse
|
|
 |
|
|
|
Output fuseholders - clip together
|
|
|
|
 |
|
|
Extra Connectors - now with two sizes of seals
|
2 Position .090 Waterproof MT Connector.
L - Fits wires from .5mm - 1.25mm (20 - 16 AWG).
S - Fits wires from 0.25mm - 0.5mm (28 - 20 AWG).
|
|
|
|
|
|
2P Set L $3.95 ea
|
|
|
|
2P Set S $3.95 ea
|
|
|
|
|
|
|
2P Male L $2.49 ea
|
|
|
2P Male S $2.49 ea
|
|
|
|
|
|
2P Female L $1.95 ea
|
|
|
2P Female S $1.95 ea
|
|
|
|
Extra terminals, seals, and plugs
|
Sealed MT090 Pins and Seals
|
|
|
|
HM/MT Large Seal (20-16 AWG) $0.09/EA
|
|
|
HM/MT Small Seal (28-18 AWG) $0.09/EA
|
|
|
HM/MT Plug $0.12/EA
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
HM/MT/HW Male Terminal $0.11/EA
|
|
|
|
HM/MT/HW Female Terminal $0.11/EA
|
|
|
|
Leads and Extensions
Various pre-finished leads of the highest quality are available for running your circuit wires from the 3CS under the seat to up front to power a socket, SAE, aux lights, or other devices. Leads are available for a variety of power socket connections to plug in directly. Extensions can be used where you install the male connectors that come with the 3CS-S on the wires of your device (like an automotive socket with pigtails), everything then plugs together. Wires, connectors, and sheathing are high temp, highest quality, Japan made and assembled by Eastern Beaver.
Extensions
- pre-made solutions to get from the Kit Output connectors to your accessory or splitter.
- 3CS Sealed male connector on one end and a female on the other end.
|
3CS-S Extensions 80 cm (32”) $12.95
|
|
|
3CS-S Extensions 120 cm (48”) $14.95
|
|
|
3CS-S Extensions 160 cm (64”) $16.95
|
|
Leads - these leads have specific terminating connectors for different accessories
|
|
CS Kit Leads with SAE Plug
|
|
|
|
|
 |
|
|
|
2 Prong SAE Plug for battery chargers, etc., WITH 16 AWG wire. (NOW WITH SAE CAP)
|
|
|
CS Kit Leads Sealed (SAE) 15 cm (6”) $10.95
|
|
|
CS Kit Leads Sealed (SAE) 30 cm (12”) $11.95
|
|
|
CS Kit Leads Sealed (SAE) 60 cm (24”) $12.95
|
|
|
CS Kit Leads Sealed (SAE) 90 cm (36”) $14.95
|
|
|
CS Kit Leads Sealed (SAE) 120 cm (48”) $16.95
|
|
|
CS Kit Leads Sealed (SAE) 160 cm (64”) $18.95
|
|
|
|
|
|
CS Kit Leads with T-Connector
|
|
|
|
|
|
 |
|
|
|
2 Prong T-Connector for Powerlet and Hella type Socket - with 18 AWG wire
|
|
|
|
CS Kit Leads Sealed (TCON) 15 cm (6”) $10.95
|
|
|
CS Kit Leads Sealed (TCON) 30 cm (12”) $11.95
|
|
|
CS Kit Leads Sealed (TCON) 60 cm (24”) $12.95
|
|
|
CS Kit Leads Sealed (TCON) 90 cm (36”) $14.95
|
|
|
CS Kit Leads Sealed (TCON) 120 cm (48”) $16.95
|
|
|
CS Kit Leads Sealed (TCON) 160 cm (64”) $18.95
|
|
|
|
|
CS Kit Leads with 1/4” Pushons
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
2 1/4” Sheathed Push-on Receptacles for Automotive Sockets etc. - with 18 AWG wire
|
|
|
|
CS Kit Leads Sealed (.250”) 15 cm (6”) $10.95
|
|
|
|
CS Kit Leads Sealed (.250”) 30 cm (12”) $11.95
|
|
|
|
CS Kit Leads Sealed (.250”) 60 cm (24”) $12.95
|
|
|
|
CS Kit Leads Sealed (.250”) 90 cm (36”) $14.95
|
|
|
|
CS Kit Leads Sealed (.250”) 120 cm (48”) $16.95
|
|
|
|
CS Kit Leads Sealed (.250”) 160 cm (64”) $18.95
|
|
|
|
Splitters
These splitters are designed to allow you to power even more accessories from your 3CS.
All splitters are 30 cm(12”) long.
They are made of high quality Yazaki wire of 0.75 sqmm (18 AWG), with high temp flexible sheathing.
You can order any of the combinations below and more. Pick the connectors you need for your accessories.
The Splitters below are examples of possible choices, and plug into the 3CS Sealed or the 3CS Sealed Leads above.
|
|
|
|
|
|
|
|
Two sealed 3CS outputs - use to split one 3CS output to two.
|
|
|
|
One T-Connector for Powerlet type sockets, and one set of insulated push on 1/4” females - use to connect one 3CS output to two different sockets.
|
|
|
|
Two sets of 1824 Posi-Locks for the ultimate in easy installations. Also use when you have devices with pigtails.
|
|
|
|
Another output option (not shown) is a high quality SAE connector with cap.
|
|
|
|
|
3CS Sealed Splitter $19.95
|
|
Kit Options:
FREE - Switching Lead Posi-Tap Choice: I now give you a choice of a Posi-Tap to suit different wire sizes. Some bikes, especially CanBUS bikes have very small wires. The parking light wire definitely needs a PTA2022 it’s so small. There is no charge for this option but of course you must be buying a Kit which includes a PosiTap. See the Posi Products Page for info about Posi-Taps and their sizes.
The Kit’s default is the PTA1800 which will fit most bikes but it’s nice to have the right size.
Order a few extra sizes from the Posi Products Page and make sure you have one that fits just right.
|
Switching Lead Posi-Tap Choice (Choose Once ONLY)
|
|
CanBUS Protective Diode Option: A protective diode can be ordered inline on the ignition switched lead, preventing reverse current flow back to the bike. This is highly recommended for CANBus bikes.
|
Protective Diode in Switching Wire Option $5.95
|
|
|
Installation Instructions Click Here
Custom Kits for some bikes Click Here
These kits are all hand assembled in Japan and made of the highest quality materials. All parts are made in Japan.
These kits can be used on any bike, even a mini bike or mobility scooter.
You can install two or even three of these Kits on a bike, so if you find you need more circuits in the future you can add another 3CS or use a splitter.
I have one of these kits on each of my own bikes. They are powering my GPS, an aux socket, heated clothing, and aux lights.
|
|
